Icom IC-208H Scan resume timer, Memory name setting, Channel skip setting, Memory bank setting

11 OTHER FUNCTIONS

DScan resume timer

Selects scan resume timer from SCT-15 (default), SCT-10, SCT-5 and SCP-2.

•SCT-15/10/5 : Scan pauses for 15/10/5 sec., then re- sumes.

•SCP-2 : Pause on a signal until signal disap- pears, then resumes 2 sec. after the sig- nal disappears.

DMemory name setting

Sets memory name setting from ON (appear) and OFF (not appear; default) for memory name appearance.

This item appears when set mode is accessed from memory mode only.

DChannel skip setting

Sets channel skip setting from ON and OFF for memory skip scan operation.

This item appears when set mode is accessed from memory mode only.

• Default setting	• “~” or “P ~” appears
	when set to “ON.”

DMemory bank setting

Sets the desired memory bank (A to J and OFF) to assign the regular memory channels.

This item appears when set mode is accessed from memory mode only.

59