Icom IC-208H Manual transmission, Mentarily, then push the desired Dtmf keys A to F

9 DTMF MEMORY ENCODER

DManual transmission

zDeactivate the DTMF memory encoder by

DTMF-Spushing [FUNC] then [SET B(D-OFF)].

xPush [DTMF-S] to turn the DTMF direct selec- tion ON.

•The function indicator (microphone) lights green. c Push one of “0” to “9” and “A” to “F” keys mo-

mentarily, then push the desired DTMF keys,

0–9 and A to F.

• A: [CLR A(MW)]	B: [SET B(D-OFF)],
C: [ENT C(T-OFF)]	D: [SQLY D(MUTE)],

E:[M(TONE-1)] F: [SQLZ #(16KEY-L)]

•Automatically transmits without pushing PTT.

•The first code, one of “0” to “9” and “A” to “F,” is not transmitted. DTMF code transmission starts from the 2nd code.

v Push [DTMF-S] again to deactivate the DTMF direct selection.

■ DTMF speed USING INITIAL SET MODE

The rate at which DTMF memories send individual DTMF characters can be set to accommodate operating needs.

The display shows the fastest

DTMF speed is selected.

qPush [PWR] for 1 sec. to turn power OFF.

wWhile pushing [SET•LOCK], push [PWR] for 1 sec. to turn power ON and enter initial set mode.

ePush [SET•LOCK] or [S.MW•MW] several times until “DTD” appears as shown above.

rRotate [DIAL] to select the desired speed as shown in the table below.

tPush [PWR] to exit initial set mode. cps=characters/sec

51