Icom IC-208H instruction manual Push Func then LOW 6DTMF to turn Dtmf Dtmf encoder on

9 DTMF MEMORY ENCODER

DProgramming a DTMF code— via microphone

zPush [FUNC] then [LOW 6(DTMF)] to turn the

DTMF DTMF encoder ON.

•“d” appears in place of 100 MHz digit.

x Push [SET B(D-OFF)] to enter the DTMF memory programming condition.

cPush [Y] or [Z] to select the desired DTMF

memory channel.

vPush the desired digit keys.

•When the first digit is input, previous memory con- tents are cleared automatically.

•“E” stands for “M” and “F” stands for “# .”

•Push [Y]/[Z] and repeat this step if you make a mistake.

•The S/RF indicator shows the digit group. The indi- cation increases every 6 digits.

bPush [VFO/LOCK] to exit the programming condition.

•The [CLR A(MW)] key cannot be used to exit. If pushed, code “A” is input. Reprogram in such a case.

[EXAMPLE]: Programming “5428AB453” into DTMF memory channel “D4.”
Push	then	.	Push	Push
Push				Push

49