5 MEMORY OPERATION

Transferring bank contents

[

Contents of programmed memory banks can be cleared or transferred to another bank.

INFORMATION: Even if the memory bank contents are

cleared, the memory channel contents still remain pro- grammed.

qSelect the desired bank contents to be transferred or erased.

Push [M/CALL•PRIO] several times to select memory mode.

Push [BAND] then rotate [DIAL] to select the desired memory bank.

Bank’s initial blinks.

Push [BAND] to select the bank then rotate [DIAL] to se- lect the desired contents.

Bank’s initial stops blinking.

wPush [SET•LOCK].

MAIN

T X

M

ePush [SET•LOCK] or [S.MW•MW] several times until “BAK” appears.

The bank’s initial for the selected memory channel is displayed.

rRotate [DIAL] to select the desired bank initial to transfer or erase.

Select “-- --” indication when erasing the contents from the bank. t Push [V/MHz•PRIO] to set the bank and exit set mode. y Repeat steps q to r for transferring or erasing an an-

other banks contents.

zSelect the desired bank contents to be trans-

BANK

ferred or erased.

Push [MR/CALL] to select memory mode.

Push [FUNC], [MONI 1(BANK)] then select

SET

the desired memory bank via [Y]/[Z].

 

 

Push [CLR A(MW)] to select the bank then

[Y]/[Z]

select the desired contents via [Y]/[Z].

x Push [SET B(D-OFF)] to enter set mode.

cPush [SET B(D-OFF)] or [ENT C(T-OFF)] several times until “BAK” appears.

vPush [Y]/[Z] to select the desired bank initial to transfer or erase.

Select “-- --” indication when erasing the contents from the bank.

bPush [CLR A(MW)] to set the bank and exit set mode.

nRepeat steps z to b for transferring or eras- ing an another banks contents.

37

Page 52
Image 52
Icom IC-208H instruction manual Transferring bank contents