Icom IC-208H Priority watch operation, Push M/CALLPRIO for 1 sec. to stop the watch

8 PRIORITY WATCH

■Priority watch operation

qSelect VFO mode; then, set an operating frequency. w Set the watching channel(s).

For memory channel watch: Select the desired memory channel.

For memory scan watch:

Select memory mode; then, push [V/MHz•SCAN] for 1 sec. to start memory scan.

For call channel watch:

Select the desired call channel by pushing [M/CALL•PRIO] once or twice, then push [BAND].

e Push [M/CALL•PRIO] for 1 sec. to start the watch.

•The transceiver checks the memory or call channel every 5 sec.

•The watch resumes according to the selected scan resume con- dition. (p. 45)

•While the watch is pausing, pushing [M/CALL•PRIO] resumes the watch manually.

rPush [M/CALL•PRIO] for 1 sec. to stop the watch.

PRIO

3

zSelect VFO mode; then, set the desired fre- quency.

x Set the watching channel(s).

For memory channel watch:

Push [MR/CALL] then [Y] or [Z] to select the de- sired memory channel.

For memory scan watch:

Push [MR/CALL], then push [SCAN 2] to start the memory scan.

For call channel watch:

Push [MR/CALL] for 1 sec. then push [BAND] to select the call channel.

cPush [PRIO 3(PTT-M)] to start the watch.

•The transceiver checks the memory or call channel every 5 sec.

•The watch resumes according to the selected scan re- sume condition. (p. 45)

•To resume the watch manually when paused, push [PRIO 3(PTT-M)] or [CLR A(MW)].

vTo stop the watch, push [CLR A(MW)] once (or twice while watch is paused).

47