Icom IC-208H Setting the auto repeater function ON/OFF, Frequency range and offset direction

4 REPEATER OPERATION

■ Auto repeater USING INITIAL SET MODE

(U.S.A. version only)

The USA version automatically activates the repeater settings (DUP– or DUP+ and tone encoder ON/OFF) when the operating frequency falls within the general repeater output frequency range and inactivate them when outside of the range.

DSetting the auto repeater function ON/OFF

qPush [PWR] to turn power OFF.

wWhile pushing [SET•LOCK], turn power ON to enter initial set mode.

[SET•LOCK]

[PWR]

ePush [SET•LOCK] or [S.MW•MW] several times until the “RPT” display appears as shown above right.

rRotate [DIAL] to select the auto repeater function from “R1,” “R2” or OFF.

Auto DUP: ON	Auto DUP: ON
Auto tone set: OFF	Auto tone set: ON

•“R1”: auto repeater is ON, tone encoder is OFF.

•“R2”: auto repeater is ON, tone encoder is ON. t Push [PWR] to exit initial set mode.

DFrequency range and offset direction

Frequency range	Duplex direction
145.200–145.495 MHz	“DUP–” appears
146.610–146.995 MHz
147.000–147.395 MHz	“DUP” appears
442.000–444.995 MHz	“DUP” appears
447.000–449.995 MHz	“DUP–” appears

25