MEMORY OPERATION 5

DProgramming a memory channel via the microphone

The microphone can also be used to program mem-

MW ory channels.

zSet the desired frequency in VFO mode.

Push [VFO/LOCK] to select VFO mode.

Set the frequency using the keypad.

Set other data (e.g. offset frequency, duplex direction, sub- audible tone encoder ON/OFF and its frequency), if neces- sary.

xPush [FUNC] then [CLR A(MW)] momentarily. c Push [Y] or [Z] to select the memory channel.

Direct numeral input cannot be used.

vPush [FUNC] then [CLR A(MW)] for 1 sec. to program.

3 beeps may sound and the VFO contents (including

the subaudible tone frequency, etc.) are programmed.

5

Memory channel number increases when continuing to push [CLR A(MW)] after programming.

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.

 

Push

 

 

Push

then

 

 

 

 

Beep

 

Push

10 times

Push

then

for 1 sec. and continue to push

Beep

Beep

Beep

Beep

28

Page 43
Image 43
Icom IC-208H instruction manual Programming a memory channel via the microphone