Icom IC-208H instruction manual Dtmf Memory Encoder, Programming a Dtmf code

DTMF MEMORY ENCODER 9

■Programming a DTMF code

DTMF tones are used for autopatching, controlling other equipment, etc. The transceiver has 16 DTMF memory chan- nels (D0–DF) for storage of often-used DTMF codes of up to 24 digits.

rPush [SET•LOCK].

• The first digit blinks.

tRotate [DIAL] to select the desired code. y Push [SET•LOCK] to select the next digit.

•Pushing [S.MW•MW] moves the cursor backward.

qPush [MONI•DTMF] for 1 sec. to turn the DTMF encoder ON.

• “d” appears in place of 100 MHz digit.

wPush [SET•LOCK] to enter the DTMF memory program- ming condition.

• The DTMF memory channel indication blinks.

eRotate [DIAL] to select the desired DTMF memory chan- nel.

uRepeat the steps t and y to set the desired DTMF tone sequence.

•The S/RF indicator shows the digit group. The indication in- creases every 6 digits.

iPush [MONI•DTMF] to exit DTMF memory programming condition.

• Return to the previous indication as in step q.

8

9

[EXAMPLE]: Programming “5428AB453” into DTMF memory channel “D4.”

Push for 1 sec. Push Rotate

Push	then rotate	Repeat the previous step until	Push
		the desired code is entered.

48