Icom IC-208H Cloning between transceivers, Push Setlock on the master transceiver

11 OTHER FUNCTIONS

■ Data cloning
	AT POWER ON

Cloning allows you to quickly and easily transfer the pro- grammed contents from one transceiver to another; or data from a personal computer to a transceiver using the optional CS-208 CLONING SOFTWARE.

DCloning between transceivers

qConnect the OPC-474 cloning cable to [SP] jack of the master and sub-transceivers.

•The master transceiver is used to send data to the sub-trans- ceiver.

To [SP] To [SP]

wWhile pushing [M/CALL•PRIO], turn power ON to enter cloning mode (master transceiver only— power on only for sub-transceiver).

•“CLONE” appears and the transceivers enter the clone standby condition.

[M/CALL•PRIO] [PWR]

While pushing [M/CALL•PRIO], turn power ON.

ePush [SET•LOCK] on the master transceiver.

•“CL OUT” appears in the master transceiver’s display and the S/RF indicators show that data is being transferred to the sub- transceiver.

•“CL IN” appears automatically in the sub-transceiver’s display and the S/RF indicators show that data is being received from the master transceiver.

Pushing [SET•LOCK] start cloning.

rWhen cloning is finished, turn power OFF, then ON to exit cloning mode.

69