Icom IC-208H Lock functions, Frequency lock, DMicrophone keypad lock, On and OFF

■Lock functions

To prevent accidental frequency changes and unnecessary function access, use the lock function. The transceiver has 2 different lock functions.

DFrequency lock

This function locks [DIAL] and switches electronically and can be used together with the microphone lock function.

[SET•LOCK]

“L” appears

➥Push [SET•LOCK] for 1 sec. to turn the lock function ON and OFF.

•[PTT], [MONI•DTMF] (monitor function only), [VOL] and [SQL] can be used while the channel lock function is in use. Also, TONE-1, TONE-2, DTMF tones or DTMF memory contents can be transmitted from the microphone.

➥Push [VFO/LOCK] for 1 sec. to switch the

VFO/LOCK lock function ON and OFF.

SETTING A FREQUENCY 2

DMicrophone keypad lock 2

This function locks the microphone keypad.

➥Push [FUNC] then [SQLZ D(16KEY-L)] to

16KEY-L	switch the microphone keypad lock function
	ON and OFF.

•[PTT], [VFO/LOCK], [MR/CALL], [BAND], [Y], [Z], [F-1], [F-2] and [FUNC] on the microphone can be used.

•All switches on the transceiver can be used.

•The keypad lock function is released when the power is turned OFF then ON again.

14