Motorola MOTO-K301 manual Using the phone, Calls

3. Using the phone

3.1Calls

3.1.1Make a call

1.Press <or J.

2.Dial the phone number.

3.1.2Predial

1.Enter the phone number (maximum 32 digits). If you make a mistake, press Mto delete a digit.

2.Press <or Jto dial the phone number entered.

3.1.3 Dial one touch numbers 1 to 9

1. Press and hold a key from 1to 9until the number is displayed and dialed.

NOTE

You need to set the one touch number first.

- If no number is stored, you hear a double beep.

3.1.4Storing a number in memory

1. Dial the number to be stored at idle state.

2. Press and hold specific memory location buttons A/

B/C.

Using the phone

3. Press the Pbutton.

OR

1. In idle, press and hold A/B/C, enter the number. If there is number already existed, the number will be displayed and you can edit it if necessary.

2. Press Pto save.

A confirmation tone will be emitted when the number saved successfully.

3.1.5 Dialing a number from memory

In idle, press A/B/Cto dial the number pre-stored into the keys respectively.

OR

When you get a dial tone by pressing <or J, press the A/B/Cto dial the priority number.

You need to set the direct access number first.

-If no number is stored, you hear a beep and display shows List Empty.

3.1.6Call from the phonebook

1.Press .. The first entry in the phonebook is displayed.

2.Scroll ,to the entry you want.

15