Using the Telephone
Switching the Handset On/Off
When the handset is placed on the base station or charging unit, it switches on automatically and starts to charge up. Allow the batteries to be charged for 14 hours without interruption the first time they are charged. The telephone does not have an On/Off switch.
Selecting the Language
Ten different languages are available for selection for each handset. Proceed as follows to select a language:
1.Press the 
key repeatedly until menu item LANGUAGE appears.
2.Press the 
key to confirm the item.
3. | Press | or | as often as necessary to select the required language. |
4. | Press the |
| key to confirm the selection. |
Making Internal Calls
If more than one handset is registered on the base station, internal calls can be made free of charge.
1.Press the 
key.
2.Press the number of the required handset (1..4).Carry out the conversation.
3.Press the 
key to end the call.
Note: If an external call is received during an internal call, short acoustic signals are issued (call waiting).
Making External Calls
There are two ways to dial a number, namely direct dialing or
Direct dialing |
| |
1. | Press the | key and wait for the dialing tone. |
2. | Dial the telephone number and complete the call. | |
3. | Press the | key to end the call. |
1. Dial the telephone number.
2. Delete any incorrect entries by pressing the 
key.
3. Press the 
key. The number entered is dialed and a connection established. Carry out the conversation.
4. Press the 
key to end the call.
Using the Telephone
17
18