Handset Settings
1. | Press the | key as often as necessary until the HANDSET menu appears. | |
2. | Press the |
| key. |
3. | Press the | or | key to select the HS NAME submenu. |
4.Press the 
key.
5.Enter/Change the name of the handset (e.g. MOBIL 1).
Note: To enter the characters, press the relevant key the corresponding number of |
| ||||
times, 1, 2, 3 or 4 times, according to the position on the key. Press the | Settings | ||||
5 key three times for an L, for example. | |||||
| |||||
6. | Press the |
| key to confirm the input. |
| |
Saving a Prefix |
|
| |||
It is possible to save prefix numbers in the handset. This number is then recalled after | Handset | ||||
pressing the 0 key for two seconds. | |||||
| |||||
1. | Press the | key as often as necessary until the HANDSET menu appears. |
| ||
2. | Press the |
| key. |
| |
3. | Press the | or | key to select the PREFIX MEM submenu. |
| |
4. | Press the |
| key. |
| |
5. | Enter the prefix number (e.g. access code of the subscriber you call most frequently). |
| |||
6. | Press the |
| key to confirm the input. |
| |
Switching the Key Tone On/Off |
| ||||
1. | Press the | key as often as necessary until the HANDSET menu appears. | 27 | ||
2. | Press the |
| key. | ||
3. Press the | or | key to select the KEY TONE. |
4. Press the 
key.
5. Press the 
or 
key to select the setting.
6. Press the 
key to confirm the input.
Activating/Deactivating Automatic Call Answering
The automatic call answering function enables the incoming call to be taken immediately if the handset is removed from the base station. It is not necessary to press the call key after removing the handset from the base station.
1. Press the 
key as often as necessary until the HANDSET menu appears.
2. Press the 
key.
3. Press the 
or 
key to select the AUTO ANS submenu.
4. Press the 
key.
5. Use the 
or 
key to switch automatic call answering on or off.
6. Press the 
key to confirm the input.
28