Memorex MPH6935 owner manual Steps for entering names and special characters

MPH6935_OM Eng 3/13/02 2:37 PM Page 20

Memory Storing (continued)

Steps for entering names and special characters

Refer to the letters on the number keys to select the desired characters.

With each press of a numeric key, the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key.

			Number of times key is pressed
keys	1	2	3	4	5	6	7	8	9
	1
	A	B	C	a	b	c	2
	D	E	F	d	e	f	3
	G	H	I	g	h	i	4
	J	K	L	j	k	l	5
	M	N	O	m	n	o	6
	P	Q	R	S	p	q	r	s	7
	T	U	V	t	u	v	8
	W	X	Y	Z	w	x	y	z	9
	*	#	-	&	(	)	(blank)	0

If you make a mistake while entering a name

Use */t/TONE or #/s to move the cursor to the incorrect character. Press DELETE/CHANNEL to erase the wrong character, then enter the correct character. To delete all characters, press and hold DELETE/CHANNEL.

For example, to enter Memorex:

1)Pick up the handset and press and hold MEMORY.

2)Enter a number or press ▲, ▼ to select a memory location number.

3)Press SELECT.

4)Press 6 once.

5)Press 3 five times.

6)Press 6 four times, then press #/s to move the cursor to the right. Note If the next character uses the same number key, you must press #/s

to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set.

7)Press 6 six times.

8)Press 7 seven times.

9)Press 3 five times.

10)Press 9 six times.

11)When finished, press SELECT.

To continue to store the telephone number, proceed to step 6 on page 19.

Note

The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.

20