Auto prefix
You can set the D1011 to detect a dialling number and replace it with another number. The number to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits.
1.Press m, scroll dto ADVANCED SET and press m.
2.Scroll dto PREFIX. Press m.
3.DETECT DIGIT is displayed. Press m.
4.Enter the number you want to be detected and press m.
5.Scroll to PREFIX NUM. and press m.
6.Enter the number you want it replaced with and press m.
7.Press >to return to standby.
Country
If you move to another country you can set your phone to be compatible with the network settings of that country.
Depending on your country, this option may be displayed as NOT AVAIL or you country may not be displayed.
1.Press m, scroll dto ADVANCED SET and press m.
2.Scroll dto SEL. COUNTRY. Press m.
3.Enter the
4.Scroll uor dto display the required country.
5.Press mto confirm.
Intrusion
When an external call is taking place, another handset registered to the base can join in, making the call a
<.
To enable this, Intrusion must be switched On.
1.Press m, scroll dto ADVANCED SET and press m.
2.Scroll dto INTRUSION. Press m.
3.Scroll uor dto ON or OFF.
4.Press mto confirm.
5.Press >to return to standby.
ECO mode
To reduce the level of power emissions, you can select low power or ECO mode. When the ECO mode is set to ON, the base transmission power will be reduced.
To turn ECO Mode to ON or OFF:
1.Press m, scroll dto ADVANCED SET and press m.
2.Scroll dto ECO MODE and press m.
3.Press uor dto highlight ON or OFF then press mto confirm.
-A confirmation beep is emitted and the handset display will switch between the handset’s name and ECO MODE.
NOTE
When Eco Mode is set to ON, the handset range will be reduced.
Advanced settings | 25 |
|
|