Calls Log Caller ID Call Waiting | Vonage IP8100-2/81003 specification

Calls Log (Caller ID - Call Waiting)

Caller ID - Call Waiting ID

Your IP 8100-2/8100-3 is capable of displaying the name and/or number of the party calling before you answer the phone (caller ID). It is also capable of displaying caller ID information in conjunction with a call waiting alert signal (call waiting caller ID). With call waiting caller ID, the caller ID data is displayed so you can decide whether to answer the incoming call, or continue with your current conversation. Your IP 8100-2/8100-3 can hold up to 50 CID entries.

These are subscription services, provided by Vonage.

When one handset is accessing the call log, the other handsets can not access it at the same time. If this is attempted, NOT AVAILABLE AT THIS TIME will display.

Due to regional incompatibilities, caller ID information may not be available for every call you receive. In addition, the calling party may intentionally block their name and/or phone number from being sent.

• As new caller ID/call waiting ID records
are received, your handset displays will		HANDSET 1
alert you to the new caller ID records, for	5	NEW CALLS
example:	5	NEW CALLS
example:	NEW
	NEW

Basic Operation

•After you review all new caller ID records, the NEW call indication will be turned off and the screen will show:

•If the call log is full, the oldest entry is de- leted to make room for the new call. If the call log is empty when you try to enter to call log review, the following message is displayed:

Reviewing Caller ID

You can review the caller ID record via the menu, as described below or by pressing the key in idle whereby the handset jumps di- rectly to the caller ID review.

•In idle mode, press MENU to enter the menu.

•Press key to scroll to CALL LOG.

HANDSET 1

CALL LOG

IS EMPTY

>CALL LOG RINGER VOLUME