Key-Tone On/Off, Dual Channel Monitor function

Topcom Twintalker 9000

13.13 Key-Tone On/Off

When a button is pressed, the unit will beep briefly.

To set the key-tone.
•	Press	6 times. ‘to’ will be displayed.

•	Press	to enable (ON) or	disable the Roger-beep (OF).
•	Press PTT	to confirm your selection and return to the standby mode.

13.14 Dual Channel Monitor function

In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive signals transmitted on that channel and CTCSS code.

Dual Channel Monitor allows you to monitor a second channel with CTCSS code.

• Press 7 times, DCM OFF appears on the display.

• Press or to change the channel.

• Press to confirm the channel selection and go to CTCSS SUB-CHANNEL SELECTION

• Press or to change the CTCSS.

• Press PTT to confirm.

To disable the function select ‘OFF’ when setting the channel.

When the Dual Channel Monitor function is activated, the PMR will switch sequentially between the standby channel + CTCSS and the Dual Channel + CTCSS.

13.15 Button Lock

• Press and hold for 3 seconds to activate or deactivate the BUTTON LOCK mode. The BUTTON LOCK icon is displayed on the LCD Screen.

• Press and hold again to deactivate BUTTON LOCK

13.16 Headset connection

The Twintalker 9000 can be used with an optional external microphone and speaker (not included)

The connector is located under the protective rubber cover on the right side of the unit. To attach the external speaker/microphone headsets or earpiece, lift the rubber flap on the top of the unit to expose the connector.

Insert the appropriate plug into the connector.

12	Topcom Twintalker 9000