Topcom 9000 manual Ctcss Continuous Tone Coded Squelch System, Monitor, VOX Selection

Page 10

Topcom Twintalker 9000

13.7 CTCSS (Continuous Tone Coded Squelch System)

The 2 digit CTCSS code corresponds to a specific tone frequency the radio emits. Two users, with the same channel and CTCSS set can hear one another.They will not be able to hear anyone else on the channel unless the other radios have the same exact CTCSS code enabled.

The PMR has 38 CTCSS codes available.

Press

 

 

twice, the CTCSS code will flash

 

 

 

 

 

Press

or

to select another code.

 

 

• Press PTT

to confirm your selection and return to the NORMAL mode.

To confirm and shift to the next option, press

 

.

 

NOTE: Any PMR set on the same channel can receive and listen to the conversation, also when the other use a CTCSS code.

13.8 Monitor

You can use the MONITOR feature to check for weaker signals in the current channel.

Press and simultaneous to activate channel monitoring. Hold these buttons for 3 seconds for contiuous monitoring.

Press PTT to stop monitoring

13.9 VOX Selection

The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will transmit a signal when it is activated by your voice or other sound around you. VOX operation is not recommended If you plan to use your radio in a noisy or windy environment.

Press

 

3 times.

 

 

 

Press

 

to turn the VOX feature ON and press

again to select the

 

VOX sensitivity level which is indicated in the right corner of the display.

 

Press

 

until OF appears on the display, to turn VOX OFF.

In the VOX mode, the VOX icon will be displayed.

 

• To confirm your selection and return to the NORMAL mode, press PTT .

10

Topcom Twintalker 9000

Image 10
Contents Twintalker 9000 Long Range Modifications Intended purpose Safety instructionsIntroduction CE Mark and restrictionsPoisoning danger Personal safetyLegal Using a PMR device Cleaning and maintenanceDisposal of the device Getting started Removing/Installing the Belt ClipBattery Installation Charging batteriesButtons LCD Display informationUsing the Twintalker Battery Charge Level/Low Battery IndicationClock functions Transmitting a Signal Adjusting Speaker VolumeReceiving a Signal Turning the Unit ON/OFFMonitor Ctcss Continuous Tone Coded Squelch SystemVOX Selection Call Tones Channel ScanRoger Beep On/Off Button Lock Key-Tone On/OffDual Channel Monitor function Headset connectionTechnical specifications PMRWarranty handling WarrantyWarranty period Warranty exclusionsCE-mærke og begrænsninger IntroduktionPåtænkt formål SikkerhedsinstruktionerLov Personlig sikkerhedForgiftningsfare BemærkningerBortskaffelse af enheden miljø Rengøring og vedligeholdelseBrug af en PMR-enhed Kom i gang Fjern/installér bælteklipsenBatteriinstallation Opladning af batterierKnapper LCD-displayinformationUrfunktioner Batteriopladningsniveau/lav batteriangivelseBrug af Twintalker 13.2 TÆND/SLUK enhedenUdsende et signal Justering af højttalervolumenModtage et signal Skift kanalerVOX-valg Roger bip til/fra KanalsøgningOpkaldstoner Tastetone til/fraKnaplås Dobbeltkanal monitorfunktionHeadset tilslutning Tekniske specifikationer 15.2 Håndtering af fejlbehæftede enheder ReklamationsretReklamationsret ReklamationsretundtagelserPage Visit our website