Topcom Twintalker 9100
13.10 Channel Scan
CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.
|
| • | Press and hold |
| . Press | briefly to start scanning. |
|
| ||
|
|
|
|
| ||||||
|
| • | Release the buttons. |
|
|
|
|
| ||
|
| • When an active signal (one of 8 channels) is detected, CHANNEL SCAN | ||||||||
|
|
| pauses and you will hear the active signal. |
|
|
|
| |||
|
| • | Press PTT to communicate through the active signal channel. Press |
| to | |||||
|
|
| ||||||||
|
|
| deactivate channel scan. |
|
|
|
|
| ||
When an active signal (one of 8 channels) is detected, press | or | to bypass the current | ||||||||
channel and continue to search for another active channel |
|
|
|
| ||||||
13.11 Call Tones
A call tone alerts others that you want to talk.
a. Setting the Call Tone
5 different Call Tones can be selected.
• Press 
4 times. CA will be displayed.
• Press 
or 
to select another call tone or select OF to enable call tones.
•Press PTT to confirm your selection and return to the standby mode. b. Sending a call Tone
Press 
briefly. The call tone will be transmitted for 3 seconds on the set channel.
13.12 Vibrator function
When receiving a call tone, the Twintalker 9100 can also vibrate.
To set the Roger Beep.
• | Press |
|
| 5 times. ‘ ’ will be displayed. | |
| |||||
• | Press | to enable (ON) or | disable (OF) the Vibrator . | ||
• | Press PTT | to confirm your selection and return to the standby mode. | |||
ENGLISH
Topcom Twintalker 9100 | 11 |