Topcom Allure 300
13 Default settings
Flashtime: | 100ms |
Dial mode: | Tone |
Display language: | English |
14 Technical specifications
Dialling options: | DTMF (tone) / Pulse |
Flashtime: | 100/300/600 ms |
Batteries: | 3 x 1,5V, AAA |
Ambient temperature: | +5°C to +45°C |
Permitted relative air humidity: | 25 to 85% |
15 Topcom warranty
15.1 Warranty period
The Topcom units have a
Consumables or defects causing a negligible effect on operation or value of the equipment are not covered.
The warranty has to be proven by presentation of the original purchase receipt, on which the date of purchase and the
15.2 Warranty handling
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note. If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge.
Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit.
The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit is exchanged or repaired by Topcom or its appointed service centres.
15.3 Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting from use of
The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during transportation.
No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible.
16 | Topcom Allure 300 |