Topcom Allure 300
7.6Parallel telephone allow/forbid
You can forbid that another telephone can be placed in parallel with the Allure 300. If you activate this function the parallel telephone call will be disturbed.
•Press 
for 3 seconds, the display language is shown.
•Press 
repeatedly until ‘Parallel Allow‘ is display.
•Press 
or 
to select ‘Parallel Forbid’.
•Press 
to confirm the setting.
!!!! This function will not work when installed behind a PABX.
7.7Tone/Pulse setting
To change the dial mode, press 
for 3 seconds in standby mode.
The selected mode is displayed.
8Making a phone call
There are 2 ways to make a phone call :
1.Enter the telephone number. If needed, you can erase the last digits by pressing the
button. Pick up the handset or press 
. The phone number will be dialled automatically in handsfree mode.
2.Pick up the receiver or 
. Enter the telephone number.
Note: The call duration timer is shown on the 1st line of the display [h:mm:ss].
In handsfree mode, the speaker volume can be adjusted by using | or . The |
speaker volume is displayed. |
|
8.1Last number redial
The Allure 300 saves the 8 last dialled telephone numbers in the memory with indication of the call duration.
Press 
to scroll through the Redial memory. When the desired number appears on the display, there are two ways to call back :
1.Press the Dial button . The desired number will be dialled automatically in handsfree.
2.Pick up the receiver. The number will be dialled automatically.
To redial immediately the last dialled number, pick up the handset and press 
Note: The Redial button 
can also be used as a Pause button while entering a telephone number ! The letter ‘P’ appears on the display on the location where you have added a pause of 3 sec.
8.2Deactivating the microphone (mute)
It is possible to deactivate the microphone during a conversation by pressing 
. You can now talk freely without the caller hearing you.
Press 
again if you want to resume your conversation.
ENGLISH
Topcom Allure 300 | 11 |