Panasonic DMCZS40S, DMC-ZS40, DMCZS40K owner manual Settings HIGH/LOW, Detect Level, Display, Color

Application (Record)

	Taking pictures with Manual Focus
■■[Peaking]	Peaking

If [Peaking] is set to [ON] in the [Setup] menu, color is added to the portions of the image that are in focus.

●●To change the [Detect Level] or [Display Color] settings

Select [Peaking] from the [Setup] menu (→60)

Use to select [SET] and press [MENU/SET]

Use to select [Detect Level] or [Display Color] and press [MENU/SET]

Use to select the setting and press [MENU/SET]

	The detection level for in-focus portions is set.
	When [HIGH] is set, portions to be highlighted are reduced, allowing you to
[Detect Level]	achieve a more precise focus.
	■■Settings: [HIGH]/[LOW]
	••The detection level setting does not affect the focus range.
	Sets the highlighting color used for [Peaking].
	■■Settings
	The available color settings differ depending on the setting of [Detect
	Level].
[Display	Changing the [Detect Level] setting also changes the [Display Color]
	setting as follows.
Color]
		[Detect Level]		[HIGH]		[LOW]
		[Display Color]	[	] (Light blue)	[	] (Blue)
			[	] (Yellow)	[	] (Orange)
			[	] (Green)	[	] (White)

●●When [Peaking] is set to [ON], [  ] ([Detect Level]: [HIGH]) or [  ] ([Detect Level]: [LOW]) will be displayed.

●●When [Fn Button Set] (→133) is set to [Peaking], you can switch the setting in the following order every time the [Fn] button is pressed: [ON] ([Detect Level]: [LOW]) → [ON] ([Detect Level]: [HIGH]) → [OFF].

●●Since portions with clear outlines on the screen are highlighted as in-focus portions, portions to be highlighted vary depending on the recording conditions.

●●The color used for highlighting does not affect recorded pictures.

- 98 - VQT5E74