Panasonic DMC-ZS40, DMCZS40K 267, Using GPS Assist Tool by connecting the camera and computer

GPS

Reducing the time required for positioning

■■Using “GPS Assist Tool” by connecting the camera and computer

Preparation:

Turn on the computer and close all other open application programs.

Select [Assist Data] from [GPS] menu and press [MENU/SET]

Use to select [Update] and press [MENU/SET]

Use to select [Connect USB] and press [MENU/SET] Connect the camera to a computer

Check the plug direction and insert it straight in. (If the cable is inserted in the wrong direction, the plug could become deformed and cause faulty operation)

Also, do not insert into the wrong socket. Doing so may cause damage to this unit.

USB connection cable (supplied)

[Access] (sending data)

••Do not disconnect the USB connection

cable (supplied) while [Access] is displayed.

Start up the “GPS Assist Tool” on your computer and update the GPS assist data (→269)

The GPS assist data of the camera is updated.

Terminate the connection between the camera and computer and disconnect the USB connection cable (supplied)

●●You can also update the assist data if you select [GPS assist data] for [USB Mode] (→72) when you connect the camera to a computer.

●●Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (optional). Using cables other than the above may cause a malfunction.

- 267 - VQT5E74