Panasonic DMCZS40S, DMC-ZS40 314, Computer does not recognize card only reads built-in memory

Others

Q&A Troubleshooting

TV, computer, printer (continued)

Computer does not recognize card (only reads built-in memory).

●●Disconnect USB connection cable (supplied) and reconnect with card in place.

Computer does not recognize card. (When using an SDXC Memory Card)

→ Check whether your computer is compatible with SDXC Memory Cards. http://panasonic.net/avc/sdcard/information/SDXC.html

→ A message prompting you to format the card may appear when you connect it. Do not format the card.

→ If the [Access] indicator on the screen does not go off, turn the camera off before disconnecting the USB connection cable.

Cannot print when connecting to printer. ●●Printer not compatible with PictBridge. ●●Set [USB Mode] to [PictBridge(PTP)] (→72).

The edges of pictures are cut off when printing.

●●Release any trimming or edgeless printing settings on printer before printing. (Refer to the instruction manual for the printer.)

●●The pictures were recorded in [   ] aspect ratio.

→ If printing in shop, check if 16:9 sizes can be printed.

Cannot print panorama pictures properly.

●●The aspect ratio of panorama pictures is different from that of regular still pictures, and some panorama pictures may not be printed correctly.

→ Use a printer with support for panorama pictures. (Refer to the instruction manual for the printer.) → We recommend adjusting the size of a picture in accordance with print paper using the

“PHOTOfunSTUDIO” software on the CD‑ROM (supplied).

- 314 - VQT5E74