Panasonic DMCZS40S, DMC-ZS40 Changing the position and size of the AF area Focus Area Set

Application (Record)

Taking pictures with Auto Focus

■■Changing the position and size of the AF area ([Focus Area Set])

When [AF Mode] is set to [  ] (1-area-focusing), you can move the position or size of the AF area at the center.

Select [AF Mode] from the [Rec] menu and press [MENU/SET] (→60)

Use to select [  ] from the [AF Mode] items and press [DISP.] button

To change the AF area

To move the position of the AF area: Press

To change the size of the AF area: Turn the control dial ••To restore the AF area to its initial state (position and

size) → Press [DISP.] button. Press [MENU/SET]

••If the [Fn] button is set to [Focus Area Set] (→133), press the [Fn] button and then perform steps and after.

●●Cannot be changed during motion picture recording.

●●When the AF area is small, it may be difficult to adjust the focus.

●●When [Metering Mode] is set to [  ] (spot-focusing), the new position of the AF area will be measured.

●●The position and size cannot be changed in [Miniature Effect] of [Creative Control] mode.

- 92 - VQT5E74