Panasonic DMC-ZS40, DMCZS40K Slide the release lever to, Open position and open Card/battery door

Preparations

Charging battery

Inserting the battery

To charge the battery, insert it into the camera.

Slide the release lever to the	[OPEN] [LOCK]
[OPEN] position and open the
card/battery door
	Release lever

Insert the battery all the way

••Insert the battery all the way firmly and check that it is locked by lever.

Close the card/battery door and
then slide the release lever to	Lever
the [LOCK] position
	Make sure to insert the battery in
	the correct orientation.

■■To remove battery

Move the lever in the card/battery compartment in the direction of the arrow.

●●Always use genuine Panasonic batteries.

●●If you use other batteries, we cannot guarantee the quality of this product. ●●Remove battery from camera after use.

••Keep the battery in a plastic bag, making sure that it is kept away from metallic objects (such as clips) when carrying or storing it.

●●To remove the battery, turn the camera off and wait until the LUMIX indicator on the screen goes off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded data.)

●●The unusable battery should be discarded in accordance with battery recycling laws. Call the RBRC hotline at 1-800-822-8837 for information.

- 18 - VQT5E74