Panasonic DMC-ZS40 Burst function, 102, Press button Use to select Burst and press MENU/SET

Application (Record)

Burst function

■■Recording mode:

A burst of still pictures can be recorded while the shutter button is pressed fully.

Press [  ] button (  )

Use to select [Burst] and press [MENU/SET]

••To change the burst setting, press the [DISP.] button and select a setting with .

Setting	Speed	Description	No. of
			pictures∗2
		••The burst speed is adjusted automatically in
		accordance with the movements of people, pets
∗1	Approx. 2 - 10	or other subjects. ([Intelligent Burst mode])
		••When a fast-moving subject is recorded, the	100
	pictures/sec.	frame rate becomes faster and the number
		of pictures that can be recorded in a series is
		restricted to about 10.
		••The subject is brought into focus as far as this
	Approx. 2	is allowed by the burst speed (excluding [MF]).
	pictures/sec.	However, when the burst function is operating
		during motion picture recording, the focus is
		fixed to the first picture.	100
		••The pictures are taken with the burst function
	Approx. 5	while the exposure and White Balance are
		being adjusted.
	pictures/sec.
		••The burst speed may be reduced under certain
		recording conditions.

∗1 [Intelligent Auto] Mode only

∗2 The number of burst pictures is limited by the picture-taking conditions and the type and/or status of the card used.

	(Continued on the next page)
- 102 -	VQT5E74