AXISS 50 | 3 |
1.INSTALLATION
-Plug one end of the phone line into the telephone line wall socket and the other end into the back of phone.
-Plug one end of the telephone cable into the base of the unit and the other end into the receiver.
2.BUTTONS
1. Transfer button | 3. Pause P |
2. Redial button 
3.OPERATION
3.1 CALL TRANSFER (R BUTTON)
With the Transfer button R, also called flash or recall, you can transfer phone calls when you are using a telephone exchange (PABX).
3.2 LAST NUMBER REDIAL
When you want to call back the last dialled telephone number, press the Redial button as soon as you have picked up the receiver. The number will be redialled automatically.
3.3 RINGER VOLUME
When you receive a phone call, the unit will ring. The ring volume can be adjusted by means of the Ring Volume switch at the back of the phone (Hi- 
, Lo- 
)
3.4 TONE/PULSE SETTING
The Axiss 50 has been set to tone dialling mode (DTMF). When you press a numerical button and you still hear the dialling tone, you have to switch to pulse dialling mode by means of the Tone/Pulse (T/P) switch.
4. WARRANTY
This equipment comes with a
During the time of the warranty Topcom will repair free of charge any defects caused by material or manufacturing faults. Topcom will at its own discretion fulfil its warranty obligations by either repairing or exchanging the faulty equipment.
Any warranty claims will be invalidated as a result of intervention by the buyer or unqualified third parties.
Damage caused by inexpert treatment or operation, and damage resulting from the use of
The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor does it apply if the unit numbers on the equipment have been changed, removed or rendered illegible.
ENGLISH
Note: Please do not forget to enclose your receipt if you return the equipment.