Topcom Butler Outdoor 2000
To change the dialling mode:
1.Enter the menu by pressing /OK
2.Select setup using the up and down keys
3.Press OK
4.Select DIAL MODE using the up and down keys
5.Press OK
6.Select the dialling mode using the up and down keys
7.Press OK to validate
4.8Flash time duration
1.Enter the menu by pressing /OK
2.Select SETUP using the up and down keys
3.Press OK
4.Select RECALL using the up and down keys
5.Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time (250ms)
4.9Automatic answer
When there is a incoming call and the handset in on the base, the phone automatically takes the line when lifted. This is the default setting, but can be set OFF:
1.Enter the menu by pressing /OK
2.Select HANDSET using the up and down keys
3.Press OK
4.Select AUTO ANSWER using the up and down keys
5.Select ON (for automatic answer) or OFF
6.Press OK
4.10 Reset
It is possible to return the phone to the original default configuration. This is the configuration which was installed when you first received the telephone.
To return to default settings:
1.Enter the menu by pressing /OK
2.Select SETUP using the up and down keys
3.Press OK
4.Select DEFAULT using the up and down keys
5.Press OK
6.Enter the 4 digit PIN code (default =0000). Press OK.
7.Press again OK to validate
14 | Topcom Butler Outdoor 2000 |