Record Ringer Tones

UU438DH_ENG.fm Page 6 Monday, June 13, 2005 7:00 PM

You will also use the joystick to make menu selections.

To enter the menu, press the center of the joystick inwards or press the MENU soft key.

To highlight the option you want, move the joystick up, down, right or left. This will move the cursor to your selection, which will appear in reverse text or icon.

To select the highlighted option, press the center of the joystick inward (You can also press the OK soft key).

To go back to the previous menu at any time, press the BACK soft key. To exit the MENU

and return to standby, press END or return the handset to the charging cradle.

Using your handset with compatible CLT-E23 and CLT-E30/32/33 series phones

Note:

Not all features are available when this handset is used with the CLT-E23 and CLT-E30/32/33 series main base. If you want to use all of this handset's features, use it with a CLT-E40/42 series base.

The CLT-OHE40 has many new features. You can record a ringer from any audio source, select animation on the display, and set alarms to remind you of important events.

1)Connect the audio recording cable to the handset and sound source (e.g. stereo or CD player). Insert one end of the audio recording cable into the handset's headset jack and the other end into the sound source.

You can also simply use the handset's microphone by holding the handset close to the sound source.

2)Select menu option .

3)Go to Record Ringer.

4)To start recording, press the RECORD soft key. The message counter starts at 60 and then begins to count down.

– E6 –