Shiro SC3130 user manual Installing or Replacing the Battery, Switch Operation, Software Setting

SC3130 User Guide

1. INSTALLING OR REPLACING THE BATTERY

Install 3 Alkaline AA batteries into the battery compartment and re-fit the cover before use.

IMPORTANT—before removing the battery compartment cover, ensure the base unit is disconnected from the telephone line.

Connection and conditions for use

You can connect your SC3130, to public networks in the United Kingdom or to an approved PBX using DTMF signaling. Each item of telephone equipment (phones, fax machines, etc.) has a ringer equivalence numbers (REN). The RENs of all equipment connected to an exchange line must not add up to more than 4 otherwise, one or more phones may not ring and/or answer calls correctly.

SC3130 has a REN of 1, and most other telephones have a REN of 1 unless marked otherwise.

2. SWITCH OPERATION

IDD LOCK switch

Use the keys provided in the package. The telephone allows all outgoing number if the key is on red point. It cannot dial outgoing number starting with digit 0 when the key is on green point.

3. SOFTWARE SETTING

In on-hook mode, press SET key to enter menu setting, the phone LCD will display SET 1 DATE, press UP/- or DOWN/+ key to select different options. Press SET key again to confirm. Use UP/- or DOWN/+ key to select the mode you need. After completing the setting, press SET key to go to the next item. To exit menu, press DEL key.

By pressing SET key (under the on-hook mode), you can select the following:

SET ITEM

DATE/TIME

OPERATIONS

LCD panel displays SET 1 DATE, press SET key to enter this mode. The year value would flash, use UP/- or DOWN/+ key to select value, then press SET key to move to next item.

4