MODE/ALARM key, Phonebook key, Pause key

SC3128 User Guide

MODE/ALARM key

For MODE function:

When checking incoming calls, press MODE key and you will see on the LCD, NORM VIP REJ REV. Use UP key to select the option and press MODE key again to enter. Press UP key to check the information stored in this area and press DEL key to delete.

For ALARM function:

Press ALARM key and you will see on the LCD ALARM OFF. Use UP key to turn it on and press SET key to set the ALARM TIME show on LCD. Input the time by using the UP key and press SET key to confirm.

The alarm will stop ringing by pressing FLASH/SNOOZE key to pause for 8 minutes. You can also press ALARM key to stop it until next preset time. The duration of the alarm ring is one hour and fifty-seven minutes maximum. The function could be cancelled pressing ALARM key.

PHONEBOOK key

Press PHONEBOOK key and input the first alphabet/character of the name. You could view the list of telephone numbers by pressing PHONEBOOK key again. You can keep pressing PHONEBOOK key to view in sequence. To redial, press REDIAL/BACK key.

PAUSE key

To insert a 3.6 second of pause while dialing, press PAUSE key and it will display P on the LCD panel.

FILTER/MUTE key

For FILTER function:

Press FILTER key and you will see on FILTER START. Use UP key to set the hour start time and press SET key to confirm. Repeat the operation to set minute. Set the FILTER STOP time by pressing UP key and SET key. You will notice the FILTER icon will appear on the LCD. Once filter is set, the ringer will be off when there is an incoming call.

For MUTE function:

Press MUTE key to prevent the remote caller to hear any sound from your side.

HF (HANDSFREE) key

While on-hook, press the HF key to go into handsfree mode. You can talk through the microphone and listen from the speakerphone without lifting the handset. While off-hook, press the HF key and put down the handset to go into handsfree mode.

REDIAL/BACK key

In the on-hook mode, pre-dial the number then press REDIAL/BACK key to auto pick up and dial out the number. In the off-hook mode, press this key to redial the last dialed number. When checking the incoming number or outgoing number, press REDIAL/BACK key to auto pick up and dial out the number directly.