Additional Notes, Troubleshooting Guide

SC3128 User Guide

FLASH (600ms) / SNOOZE key

In the on-hook mode, press this key to auto-hang up for 600ms, after that you can press REDIAL/BACK key or dial out another number.

5. ADDITIONAL NOTES

INCOMING CALL LCD INDICATOR

During a phone call, the LCD will display the phone number with name, date, time and a serial number. This is provided you have subscribed Caller ID service from your local telecom. A new number will have a NEW icon, and a repeated call with the same number will have a REP icon. A private call (when the caller prefers to hide the number) will display PRIVATE CALL. A call that is out of service will display OUT OF AREA. An incorrect incoming signal will cause the LCD to display ERROR. If the caller ID uses FSK system, the current month, date and time display will be updated (while the year remains unchanged).

LCD BACKLIGHT FUNCTION

When there is incoming call or handset is off-hook, the LCD backlight will lit up. It will be on for about 6 seconds before going off. Without batteries, LCD backlight will not lit up at all.

IN USE LED INDICATOR

When the handset is off hook or in handsfree mode, the LED will turn on.

TROUBLESHOOTING GUIDE

(Q) I do not hear any dial tone from the handset.

(A)Ensure the handset cord is connected correctly from the handset to the handset cord jack at the base. Ensure you have plug in the telephone cable from the telephone to the wall socket correctly. If the problem persists, please check with your local dealer.

(Q) I could not see the caller’s number on the LCD when there is incoming call.

(A) Ensure that you have subscribed Caller ID service from your local telecom provider.

(Q)There is no LCD Display / Backlight after I have connected the telephone line. I can call out normally.

(A)Ensure that you have inserted the batteries on the battery compartment. If there is still no display, change the batteries and ensure it is not empty. If the problem persists, please check with your local dealer.