Snom 360 manual Connecting Phone

Connecting the

phone

First connect one end of the handset cable to the handset and then to the jack labeled “” on the left-hand side of the phone’s bottom.

Next plug the Ethernet (network) cable into the RJ45 connector labeled “”, and plug the other end into the network side to establish a data link. The second RJ45 connector, labeled “”, is for daisy-chaining further Ethernet devices without the need for a second Ethernet connection line.

If you are using an external power supply, please insert the plug of the power supply into the connector labeled “” next to the data line and hook up the casing into the mains.

If you want to use a headset, it can be connected to the audio jack labeled “” on the bottom side of the snom 360.

Clip the cords into the appropriate slots on the footstand or, in the case of the handset cord, on the bottom shell of the phone (see Fig. 1 in the chap. Setting up the phone).

English

2

snom technology AG • 11