Snom 360 manual English

[ S N O M 3 6 0 Q U I C K I N S T A L L A T I O N V 1 . 0 0 ]

keypad available for the snom 360, you must place phone and keypad on an even, horizontal surface, as described above.

English

1

1Turn the phone upside down (Fig. 3). Please, ensure that you do not damage the display and/or its hinge and that you do not drop the receiver. You may want to hold the phone in your lap or have a second person hold it.

Fig. 3 Fig. 4

2Lightly press the snap-fits of the footstand inwards (Fig. 3) and, at the same time, tilt the footstand backwards and lift it from its anchorage in the mounting holes (Fig. 4).

3Rotate the footstand 180° around its vertical axis

4Make sure that the handset cord has been clipped correctly into the groove on the bottom shell of the phone, as shown in Fig. 4 and 6. Failure to clip the cord into the groove will result in damage to the cord when the footstand is attached in the position for wall mounting.

snom technology AG • 7