[ S N O M 1 9 0 A D M I N I S T R A T O R M A N U A L V 3 . 0 0 ]
This setting is switched off by default. You can set a timeout after
which a number is dialed automatically without pressing the | key or |
taking the cradle off hook. |
|
Number Guessing |
|
Here, the number guessing functionality can be activated or |
|
deactivated. |
|
Block URL Dialing |
|
You can block the dialing of sip urls by turning this setting on. In |
|
this case only numeric numbers will be allowed as input. |
|
Deny All Feature |
|
When turned on, this setting shows “Deny All” softkey on |
|
incoming calls to put the incoming numbers in the Deny List. Turning it off |
|
will disable this feature. |
|
Challenge Response on Phone |
|
As explained in an earlier chapter, snom phones can handle |
|
challenge responses on the phone. Turning this setting off will disable this |
|
feature and you will only be able to handle authentication through the |
|
web interface of the phone. |
|
Broadsoft Call Control Features | 5 |
Support for Broadsoft call control can be enabled here. | |
Call Waiting Indication |
You can enable or disable the CWI on the phone through this
setting.
Dialtone during Hold
Turning this setting on will produce a dial tone when a call is being held and the user is trying to dial the second number. Otherwise a dial tone will not be played.
Disconnect on Onhook
Sometimes it is useful to disable disconnection of a call when the handset is placed Onhook, e.g. during conference calls or handsfree mode etc. This can be achieved by turning this setting off.