[ S N O M 1 9 0 A D M I N I S T R A T O R M A N U A L V 3 . 0 0 ]
NAT detection
Administrators can select the kind of NAT according to their 5 network through this setting. Available options are “Automatic”, “UPnP”,
“STUN”, “Static” or “Off”. The default is “Automatic”.
STUN server (IP-addr:port)
If you selected „STUN“ as NAT detection type, specify the address of the STUN server followed by the port number.
STUN binding interval (seconds)
Similarly, set the STUN binding interval time in seconds through this setting.
Use Mapped Address
Through this setting you can switch on/off the mapped address
feature.
Dynamic RTP port start
If you want to set up the RTP port dynamically, give the start port number in this setting.
84 • Call Register