Troubleshooting
Before requesting service, please try the following solutions:
The unit will not turn on. | Sound is not produced in AUX mode. | |
• Connect the power plug to the outlet. | • Check the power of the external device and | |
• Your player will not turn on if the battery is | whether the music is playing or not. | |
completely drained. Recharge the battery | • Make sure the AUX mode is selected. | |
and turn the player on again. | • Check if the audio cable is connected | |
• Check if the battery is discharged. | properly. | |
A function does not work when the button | • Turn up the volume of the product/external | |
is pressed. | device. | |
• Disconnect the power plug and connect it |
| |
again. | The SoundShare (TV pairing) failed. | |
• Check if the buttons correspond to the | ||
• Check whether your TV supports | ||
functions you want to activate. | ||
SoundShare. (http://www.samsung.com) | ||
Sound is not produced. | ||
• Check whether your TV has the latest | ||
• Make sure the unit is properly connected. | firmware. | |
• Check if the Mute function is on. | • Reset the unit. | |
• Check if the volume is set to minimum. | • If the function doesn't work even though | |
The power of the unit is off. | the connection is completed, contact the | |
• The unit automatically turns off in the | Samsung call center. | |
following situations. |
| |
Other Notes
About the Battery
•If the battery is nearly discharged, red indicator begins to blink and eventually turned off.
•If the battery has insufficient charges, pressing the power button does not turn on the product. Instead, the battery indicator blinks red a few times and turns off.
•While the battery indicator is blinking, all other buttons will not work.
•If the battery is fully discharged, all function, volume and bass settings are initialized.
About NFC
•NFC tagging for Bluetooth connection cannot be established while powering on and off.
•NFC tagging for Bluetooth connection will not work while the battery indicator is blinking.
About Automatic Bluetooth Connection
•When switching to Bluetooth mode or powered up in Bluetooth mode, the last Bluetooth connection will be restored automatically if available. Automatic Bluetooth connection attempt will abort after 1 minute.
•Within the automatic connection trial, connection to another Bluetooth device can be limited. To connect to a different Bluetooth device, switch the product’s Bluetooth mode to pairing mode. (See page 3.)
the cable is connected in AUX mode. | or connect properly in the following cases. | |
• If there is a strong electrical field around | ||
disconnected for 25 minutes. | ||
the Wireless Audio Portable. | ||
• If several Bluetooth devices are simultaneously | ||
has been disconnected from this unit for | ||
25 minutes. | paired to the Wireless Audio Portable. | |
• If the Bluetooth device is turned off, not in | ||
place, or malfunctions. | ||
phone is charging. | ||
|
Specifications
Model name :
Power supply : DC 14V 2.5A
Power consumption : 23W
Weight : 2.42 Ibs
Dimensions (W x D x H) :
8.8x 1.8 x 5.2 inches Operating temperature range : +41°F to +95°F
Operating humidity range : 10 % to 75 %
Copyright
©2013 Samsung Electronics Co.,Ltd.
All rights reserved; no part or whole of this user’s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.
-Open the rear cover to check the label.