KitchenAid KUDM01FK manual Cycle Selection Chart, Canceling a Cycle, To stop the drain

Models: KUDM01FK

1 36
Download 36 pages 63.59 Kb
Page 11
Image 11

Cycle Selection Chart

Select the wash cycle and options desired. Or press START to repeat the same cycle and options as the previous cycle.

NOTE: If the last cycle you completed was a rinse cycle, the dishwasher will run the last full wash cycle and options that you selected when you press Start.

If the power is off or the door is open for an extended period of time, the Start button memory will default to the Normal cycle with heated drying.

If you do not run the dishwasher daily, close the door to maintain memory.

A “●” shows what steps are in each cycle.

Temperatures indicate where extra heat is added.

Water usage is shown in U.S. gallons/liters.

This model meets the ENERGY STAR® guidelines for energy efficiency.

Cycle time includes dry time. An asterisk ( * ) by the cycle time indicates the cycle time might be longer depending on the temperature of the water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle time will be as shown.

 

 

Use this cycle for pre-

 

 

 

 

 

rinsed and lightly-soiled

 

 

 

 

 

loads. During the

 

 

 

 

 

heated dry, the heating

Use the main wash

 

 

element cycles on and

 

 

detergent dispenser

 

 

off.

 

 

 

 

 

 

section.

 

 

 

 

 

 

 

Pre-

Rinse

Main

Purge†

Final

Dry

Time

Water

Wash

 

Wash

 

Heated

 

(min)

Usage

 

 

 

 

Rinse

 

 

(gal/L)

 

71*

5.5/21

 

 

120°F

 

135°F

 

 

 

 

 

(49°C)

 

(57°C)

 

 

 

 

 

Use this rinse cycle for

 

 

 

 

 

rinsing dishes, glasses,

 

 

 

 

 

and silverware that will

 

 

 

 

 

not be washed right

Do not use detergent

 

 

away.

 

 

 

 

 

 

with this cycle.

 

 

 

 

 

 

 

Pre-

Rinse

Main

Rinse

Final

Dry

Time

Water

Wash

 

Wash

 

Heated

 

(min)

Usage

 

 

 

 

Rinse

 

 

(gal/L)

 

 

 

 

 

10

1.8/7

A small amount of water is run through the pump to remove soil particles between the main wash and final rinse.

 

 

Use this cycle for

 

 

 

 

 

heavily-soiled pots,

 

 

 

 

 

pans, casseroles,

Use both detergent

 

 

regular tableware and

 

 

harder than normal

dispenser sections.

 

 

water conditions.

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-

Main

Rinse

Rinse

 

Final

Dry

Time

Water

Wash

Wash

 

 

 

Heated

 

(min)

Usage

 

 

 

 

 

Rinse

 

 

(gal/L)

 

 

 

 

 

 

 

 

 

 

 

89*

6.9/26

130°F

140°F

 

 

 

140°F

 

 

 

(54°C)

(60°C)

 

 

 

(60°C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use this cycle for loads

 

 

 

 

 

 

 

 

 

 

with normal amounts of

 

 

 

 

 

food soil. (The energy-

Use both detergent

 

 

usage label is based on

 

 

this cycle.)

 

dispenser sections.

 

 

 

 

 

 

 

 

Pre-

Main

Purge†

Rinse

 

Final

Dry

Time

Water

Wash

Wash

 

 

 

Heated

 

(min)

Usage

 

 

 

 

 

Rinse

 

 

(gal/L)

 

 

 

 

 

 

 

 

 

 

 

79*

5.5/21

 

120°F

 

 

 

140°F

 

 

 

 

(49°C)

 

 

 

(60°C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Canceling a Cycle

1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.

2.Press

Cancel

Cancel glows.

3.Close the door. The dishwasher starts a 2 minute drain (if needed). Let the dishwasher drain completely.

To stop the drain

You can press CANCEL again to stop the drain. Remember to drain the dishwasher before starting a new cycle.

To clear the indicators

Press CANCEL before starting the dishwasher to clear all options and cycles.

11

Page 11
Image 11
KitchenAid KUDM01FK manual Cycle Selection Chart, Canceling a Cycle, To stop the drain, To clear the indicators