Changing a Cycle or Setting
During the first minute of a cycle
1.Open the door.
2.Press a new cycle and/or options.
3.Check the detergent dispensers. They must be filled properly for the new cycle.
4.Close the door. The dishwasher resumes the new cycle and/or option after a 5 second pause.
After the first minute of a cycle
1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.
2.Press
Cancel
Cancel glows.
3.Close the door. Your dishwasher starts a 2 minute drain (if needed). Let the dishwasher drain completely.
4.Select a new cycle and/or options.
5.Press START.
6.Check the detergent dispensers. They must be filled properly for the new cycle.
7.Close the door.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.
To add items
1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door.
2.Open the door. If the detergent dispenser cover is still closed, add the item.
3.Close the door firmly until it latches. The dishwasher resumes the cycle after about a 5 second pause.
Option Selections
You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off. Select a different option if desired.
You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.
Press START to repeat the same cycle and options as the previous wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when you press Start, the dishwasher runs the last full wash cycle and options.
Hi-Temp Scrub
Select this option to heat the water during parts of the cycle, and add a rinse. Higher water temperatures and an extra rinse helps clean tough soils.
This option adds heat, water and wash time to a cycle.
NOTE:
Energy Saver Dry
Select this option to dry dishes without heat and save energy. Energy Saver Dry is useful when loads contain plastic dinnerware that may be sensitive to high temperatures.
The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.
NOTE: Rinse Only automatically uses this option. Energy Saver Dry is an option with all other cycles.
Control Lock
Use the Control Lock to prevent unintended use of the dishwasher. You can also use the control lock feature to prevent unintended cycle or option changes during a cycle.
When Control Lock is lit, all buttons are disabled.
NOTE: The dishwasher door can be opened while the controls are locked.
To turn on the Lock
Press and hold
for 4 seconds. Control Lock glows.
If you press any pad while your dishwasher control is locked, the light flashes 3 times.
To turn off the Lock
Press and hold ENERGY SAVER DRY for 4 seconds. The light turns off.
12
