Shiro SD8501 user manual Base Setting

Page 16

User Manual

3.Press PHONEBOOK button. The display shows the current language.

4.Press UP/DOWN button to the language you prefer.

5.Press PHONEBOOK button to confirm.

Auto Talk

Normally, you need to press the CALL button to answer an incoming call. But with AUTOTALK turned on, when your handset is resting on the base unit and it rings for an incoming call, you can answer the call by simply lifting the handset. To turn auto-talk ON/OFF:

1.Press MENU button then UP/DOWN button to HANDSET.

2.Press PHONEBOOK button then UP/DOWN button to AUTOTALK.

3.Press PHONEBOOK button again, the display will show either ON? or OFF?

4.Press

PHONEBOOK button to confirm your selection.

Take note!

If you have turned auto-talk on, do not press the CALL button after you've answered a call by lifting the handset, otherwise, you'll disconnect the call.

To Lock /Unlock the keypad

Press MENU button and “ “ button consecutively to lock or unlock the keypad.

Base Setting

Note: The default PIN is: 0000.

Call Barring Function

Call barring enables you to restrict or bar certain types of calls from your phone.

To set call barring number

1.Press MENU button then UP/DOWN button until the display shows BASE SET.

2.Press PHONEBOOK button, the display shows PIN?

3.Key in your PIN number and press the PHONEBOOK button, then press UP/DOWN button to the location BARRING.

4.Press PHONEBOOK button, then UP/DOWN button.

15

Image 16

Contents SD8501 Contents What the symbols mean Handset and Base Unit Setting up your telephone Radio signals between handset and base unitConnection and conditions for use How many phones can you connect?Whats in this pack Installation Choose a suitable site for the base unitPage Important safety information Warranty Information Making and answering calls Phone Book To clear a number from phonebookTo modify change a number in phonebook DeleteCall Logs To clear all numbers from phonebookTo check call records To save a number in call logsHandset Setting Ringer Volume EXTRinger Volume INT Key tone on and offRinger Melody INT Your handset nameDisplay language EXT RingBase Setting Base Volume VolumeTo delete call barring number Base MelodyPabx function To Set Dial ModeFlash function Resetting the system To change base PINHandset registration Intercom and transferTo register a handset To make an intercom callTroubleshooting To transfer the outside call to another outside phonePhone does not ring Technical details Handset’s batteries is running low within an hour or twoDeclaration of conformity