Extra Settings

User Manual

To Set Call Barring Number

1.Select < Call Barring> under BASE mode;

2.Select <Barring Number> under Call Barring;

3.Press left key, then key in the PIN (the default PIN is 0000);

The display shows one of the numbers from 1 to 5 (the maximum call barring numbers you can set), and then key in the telephone number you want to set call barring.

4.Press left key, and then the display shows HS?

Key in the handset number that you want to set call barring

5.Press left key to confirm.

To Delete Call Barring Number

1.See 1-3 step above, press left key; the display show the call barring number you set

2.Press and hold right key to clear the number; press left key to confirm.

To set Auto Pause

With the Auto Pause function, the phone will automatically pause for 3 seconds once the initial string of the phone number matches the PABX code. For example, if the user program to enter "9" as PABX code, then when he dials "98118118", then the phone will dial “9” first then pause for 3 seconds follow by “8118118”. To set Auto Pause:

1.Select < Dial Settings> under BASE mode;

2.Select <Auto Pause > under Dial Settings;

3.It will prompt for pin, key in the pin (the default PIN is 0000)

4.Key in the PABX number. Maximum 5 numbers can be entered. Press left key to confirm.

To set Flash

With the FLASH function, you may select Short or Long flash time for your PABX. You may activate FLASH by pressing R button. To set FLASH:

1.Select < Dial Settings> under BASE mode;

2.Select <Flash Time> under Dial Settings;

3.It will prompt for Short or Long flash. Select either one and press left key to confirm.

To Change Base PIN

1.Select <PIN> under BASE mode;

2.Press left key, and key in the original PIN (default PIN:0000) number;

3.Then press left key to confirm, and key in New PIN;

4.Press left key, then key in New PIN again; press left key to confirm

To Set Alarm Time

1.Select < Alarm Set > under EXTRA mode;

2.Press left key, then key in the time; press left key to save;

To Set Clock Time

1.Select < Clock Set > under EXTRA mode;

2.Press left key, then key in the time; press left key to save;

To Set Clock Date

1.Select < Clock Date > under EXTRA mode;

2.Press left key, then key in the date;

3.Press left key to save;