Keypad Description Handset + Base Unit, Charge

User Manual

KEYPAD DESCRIPTION (HANDSET + BASE UNIT)

Left Key

Right Key Button

Press to enter menu and sub- menu mode;

Press to confirm selection; With the key “ * ” to lock or unlock the keypad;

Up and Down Button

Press during programming to move through the menu. Press during a call to change the volume in the earpiece.

CALL button

Press to begin, answer and end a telephone call.

Register Recall button

You need the Recall function if your phone is connected to a PABX, or if you use select services; When you make an outside call, press to transfer it to another handset.

PAGE

In standby mode, press to enter phonebook menu;

Press during programming to go back to the previous option, or to clear digits from the display. Press during a call to mute the mouthpiece

INT button

Press to make an intercom call (if you have more than one handset)

Speakerphone Button

Press to turn the speakerphone ON/OFF

PAUSE Button

Press to insert PAUSE while dialing out

CHARGE

The CHARGE light comes on when the handset's batteries are being charged.

HANDSET LOCATOR

	IN USE light	SMS Button
	The IN USE light comes	Press this to go SMS
	The IN USE light comes	mode directly while the
	on when you have a	mode directly while the
	on when you have a	handset is in idle mode.
	connection to the	handset is in idle mode.
	telephone line.

Before you can use the handset to make calls for the first time, you will need to fit and fully charge the battery for 15 hours.

Press this to make the handset ring, if you cannot remember where you put it.

Press it again to stop the handset ringing.