Sipura Technology SPA-1001 manual Appendix F Sipbroker, #1*2698888xxxx@sipbroker.com

Page 16

Appendix F – Sipbroker

Sipbroker is a free service that allows you to dial between certain VoIP providers. To use sipbroker you will need to add the following entry to your dial plan.

<**,:>[x*][x*].<:@sipbroker.com>

Please see http://www.sipbroker.com to read all about the great service provided my sipbroker.

To test that Sipbroker is working for you, you first dial ** and then try one of the numbers

below.

*266-300 monkey sounds

*266-301 echo test

*266-303 Ireland speaking clock

*266-305 music

Sipbroker uses SIP-codes to communicate between the various providers that are supported. Some common codes are shown below.

Astratel *269

Pennytel *234

Sipme *320

So to dial someone on Astratel, you would dial **, followed by *269, followed by the Astratel number you are trying to reach.

You can setup another dial plan to dial Astratel numbers by adding a new dial plan, something like.

<#1:*269>8888xxxx<:@sipbroker.com>

This means that when you dial #1 you can then dial an Astratel 8888 number and it will use sipbroker to negotiate the connection.

To view the complete list of SIP-codes please visit the following site location. http://www.sipbroker.com/sipbroker/action/providerWhitePages

Image 16
Contents Step by Step Introduction JMG TechnologySetting up the hardware Getting StartedConfiguring the SPA-1001 via the Web Interface Http//IP Address of SPA-1001Regional Settings FXS Port Impedance 220+820115nF Line 1 or Line 2 Settings Preferred Codec G729a Phone Settings Appendix a Dial Plans Dial Plan SyntaxExample Dial Plans DescriptionAppendix B Factory Reset Appendix C Upgrading Firmware Page Primary NTP Server au.pool.ntp.org Appendix E Sipura IVR Phone Menu IVR Action IVR Menu Parameters ChoiceOption Successful. Hangup @sipbroker.com Appendix F Sipbroker#1*2698888xxxx@sipbroker.com