Sipura Technology SPA-1001 manual Primary NTP Server au.pool.ntp.org

Page 13

Appendix D – Setting up a Time Server and Daylight Saving Rules

You can configure the SPA-3000 to automatically retrieve the current date and time. (Including daylight savings). To do this you will need to enter in a NTP server. Some providers will provide you with one.

Change to the “System” tab

Primary NTP Server: au.pool.ntp.org

Change to the “Regional” tab

For NSW these settings seem to work:

Time Zone:

GMT+11:00

Daylight Saving Time Rule:

start=3/-1/7/3;end=10/-1/7/2;save=-1

Image 13
Contents JMG Technology Step by Step IntroductionGetting Started Setting up the hardwareHttp//IP Address of SPA-1001 Configuring the SPA-1001 via the Web InterfaceRegional Settings FXS Port Impedance 220+820115nF Line 1 or Line 2 Settings Preferred Codec G729a Phone Settings Dial Plan Syntax Appendix a Dial PlansExample Dial Plans DescriptionAppendix B Factory Reset Appendix C Upgrading Firmware Page Primary NTP Server au.pool.ntp.org IVR Action IVR Menu Parameters Choice Appendix E Sipura IVR Phone MenuOption Successful. Hangup @sipbroker.com Appendix F Sipbroker#1*2698888xxxx@sipbroker.com