Sanyo CLT-E30, CLT-E33, CLT-E32 instruction manual Handset for 15-20 hours

UP383BA_0.book Page 79 Thursday, May 26, 2005 10:48 AM

ADDITIONAL INFORMATION

Symptom Suggestion

	• Check both ends of the telephone cord.
	• Make sure the AC adapter is plugged into the base and wall outlet.
Can't make or receive	• Disconnect the AC adapter for a few minutes, and then reconnect it.
	• Remove the base ID (see "Replacing the Base Setting" on page E34) and register
calls.
	the handset (see "Register the Handset to the Base" on page E68).
	• Make sure that you are not too far from the base.
	• If an outside call is already established, you can not make another outside call.
	• Place the handset on the base or charging cradle and charge the batteries in the
	handset for 15-20 hours.
The handset doesn't	• The handset may be too far away from the base unit.
ring or receive a page.	• Place the base unit away from appliances or metal objects.
	• Remove the base ID (see "Replacing the Base Setting" on page E34) and register
	the handset (see "Register the Handset to the Base" on page E68).
Unavailable appears	• Make sure another handset(s) or base is not in use, and try the phone again.
in the display.	• Make sure that you are not too far from the base.
	• Keep the handset away from microwave ovens, computers, remote control toys,
Severe noise	wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
interference.	and electrical appliances.
	• Move to another location or turn off the source of interference.
		Additional Information [ E 7 9 ]