Backlight Battery Replacement

Because the batteries in the Organizer were installed at the factory, they may become exhausted before the specified expiration time is reached.

Operating Battery Replacement

Battery replacement time

When "LOW BATTERY" is displayed, immediately replace the operating battery with a new one.

The operating battery holder is indicated as "For OPERATION" in the battery compartment.

If the battery level is low, the alarm may not sound, or similarly the Backlight may not function. Continued use of the Organizer with low battery can alter or clear the memory contents. Memory contents may be lost if the battery is improperly replaced or if the following instructions are disregarded.

Caution:

•PC Link may not be available when the battery level is low.

•Under the low battery condition, new data entry and editing of existing data may not be performed in some modes. Also Clock and other settings may not be made.

When the Backlight cannot be turned on (except when "LOW BATTERY" is displayed or the Organizer is in the PC Link mode), replace the backlight battery.

The backlight battery holder is indicated as "For BACKLIGHT" in

the battery compartment

Replacing the batteries

•Make sure the power is turned off before replacing the batteries.

•Do not press ountil the battery replacement procedure is completed.

1.Press oto turn the power off.

2.	Loosen the screw (turn counterclockwise)
	and remove the battery holder cover on the
	back of the unit.
3.	Remove one used battery using a ball-point	RESET
	pen or similar object.
	• Do not use a mechanical pencil or sharp
	pointed object.
4.	Install one new battery with the positive
	side (+) facing up.	R
5. Repeat step 3 and 4 for replacing both		ES
		ET

	batteries, if necessary.
6.	Replace the holder cover and secure with
	the screw.
7.	The power will be turned on 2 to 3 seconds
	after ois pressed.	RESET
	after ois pressed.
	• If nothing appears on the display, press
	the RESET switch and press <.
	• Do not tap fand press x. This key sequence will clear
	all the memory contents.
8.	Set the clock to the correct time. (see page 3)

Caution:

•Clock settings and/or other settings and listings may be lost when batteries are removed for a long time. Replace the batteries as quickly as possible.

•Make sure to confirm all settings are set correctly after replacing the batteries.