Sharp EL-6810 operation manual Telephone Mode, Part Names, Changing the Guidance Language

3. Using World clock 6. Setting alarms

1.Press CLOCK once or twice to display World clock (without “ ”).

2.Press PREV or NEXT to select the desired city.

4.Changing the cities between Home and World clocks

You can change the home city for a city in another time zone without adjusting the stored correct time.

1.Press CLOCK once or twice to display World clock (without “ ”).

2.Press PREV or NEXT and select the desired city to be set as the new home city.

3.Press SHIFT SET to change the cities between Home and World clocks.

•The previous home city is now set as the world city (without “ ”).

4.Press CLOCK to check the home city.

•The selected city in step 2 is set as the home city (with “ ”).

5.Press CLOCK to recheck the world city, and

press PREV or NEXT to select the new world city, if needed.

5.Setting daylight saving time (DST: summer time)

1.Press CLOCK once or twice to display Home or World clock.

2.Press DST .

“#” is displayed. The time is set 1 hour ahead.

To clear DST, press DST to clear “#”. The time is set 1 hour behind.

Notes

•DST can be set independently in either Home or World clock.

•When DST is set for one world city, it is used for all cities displayed in World clock.

The Organizer has 3 kinds of alarm:

1.Daily alarm ........ beeps every day at the alarm

time (for 1 minute), when “” is turned on.

2.Hourly alarm ...... beeps every hour when minutes reach “00”, when “” is turned on.

3.Schedule alarm .. beeps at the time for all the

schedule entries (for 1

minute), when “” is turned on. (Refer to

“Schedule Mode”.)

Press any key to stop the alarm beeping.

Setting/Changing the daily alarm time

1.Press CLOCK once or twice to display Home clock (with “ ”).

2.Press ALARM to

	ALARM
display the daily
alarm screen.	A12–00
(The display differs

between the 12-hour and 24-hour clock.)

3.Press SHIFT SET .

4.Enter the time.

5.Press ENTER .

• The daily alarm time is set.

Turning the alarms on and off

An alarm sounds only when the respective symbol

(, , or ) is turned on.

Display Home clock (press CLOCK once or twice) and press ALARM to display the daily alarm screen.

Each time you press ALARM while the daily alarm screen is displayed, the combination of symbols switches.

Note

•Alarms sound even when the Organizer is turned off.

Telephone Mode

Telephone mode is composed of two files, TEL1 (“1” is turned on) and TEL2 (“2” is turned on). Use these files for convenience, e.g. business and private files.

A telephone entry consists of name, address, E-mail address, and number fields.

For EL-6810 only:

•Moreover, EL-6810 has the web address (URL) field that follows the E-mail address field.

•Instead of pressing TEL once or twice in the following operations, press TEL1 or TEL2 once.

Storing telephone entries

1. Press	TEL	once or	NAME?
twice to display the
Telephone mode
screen (in this case,
TEL1).

2.Enter the name, e.g. SMITH SPACE ROBERT, and press ENTER .

3.Enter the address, e.g. 18 SPACE EAST

SPACE ROAD, and press ENTER .

4. Enter the E-mail	harpsec.com_
address, e.g.

SROB SMBL

(to enter “ @ ”)

SHARPSEC.COM, and press ENTER .

•The E-mail address is automatically entered in small letters.

For EL-6810 only:

• To enter “ @ ”, simply press @ instead of

SMBL .

•After entering the E-mail address and pressing ENTER , enter the web address (URL), e.g. WWW.SHARP-USA.COM, and press ENTER .

5. Enter the phone	NUMBER?
number, and then
	2–3456–7890
the fax number if
	3456–7891_

needed, e.g.

012-3456-7890

FSPACE SPACE SPACE 3456-7891, and

press ENTER .

•“STORED!” appears briefly, then the Telephone mode screen is displayed. The telephone entry is now stored.

Field	Number of	Allowable
	characters	characters
The 1st line:	36 characters	Alphabetic letters,
Name, address,	or under	numbers, symbols,
E-mail address		“+ – × ÷ .”, space
(and web address
(URL) for EL-6810
only)
The 2nd and the		Numbers, space, –,
3rd lines:		F (Fax), P (Pager)
Phone number

Notes

•The symbol “NAME”, “ADDRESS”, or “E-mail” (or “URL” for EL-6810 only) is turned on while entering in each field.

•To skip entry of an address, E-mail address, (web address (URL),) or number, press ENTER when “ADDRESS?”, “E-MAIL?”, (“URL?”,) or “NUMBER?” is displayed. However, entering a person’s name cannot be skipped.

		ELECTRONIC ORGANIZER
		EL-6053
		EL-6810
		OPERATION MANUAL
NOTICE
• SHARP strongly recommends that separate		• SHARP assumes no responsibility, directly or
permanent written records be kept of all		indirectly, for financial losses or claims from
important data. Data may be lost or altered in		third persons resulting from the use of this
virtually any electronic memory product under		product and any of its functions, such as stolen
certain circumstances. Therefore, SHARP		credit card numbers, loss or alteration of stored
assumes no responsibility for data lost or		data, etc.
otherwise rendered unusable whether as a		• The information provided in this manual is
result of improper use, repairs, defects, battery		subject to change without notice.
replacement, use after the specified battery life
has expired, or any other cause.
In Europe:		¸ åçëáôÀóôáóè áùôÜ áîôáðïëòÝîåôáé óôé÷ áðáéôÜóåé÷
This equipment complies with the requirements of		ôöî ïäèçéñî ôè÷ ¶ùòöðá•ëÜ÷ ¶îöóè÷ 89/336/¶Ãº,
Directive 89/336/EEC as amended by 93/68/EEC.		Þðö÷ ï ëáîïîéóíÞ÷ áùôÞ÷ óùíðìèòñõèëå áðÞ ôèî
Dieses Gerät entspricht den Anforderungen der EG-		ïäèçÝá 93/68/¶Ãº.
		Este equipamento obedece às exigências da directiva 89/
Richtlinie 89/336/EWG mit Änderung 93/68/EWG.
Ce matériel répond aux exigences contenues dans la		336/CEE na sua versão corrigida pela directiva 93/68/
		CEE.
directive 89/336/CEE modifiée par la directive 93/68/
		Este aparato satisface las exigencias de la Directiva 89/
CEE.
Dit apparaat voldoet aan de eisen van de richtlijn 89/336/		336/CEE modificada por medio de la 93/68/CEE.
		Denna utrustning uppfyller kraven enligt riktlinjen 89/336/
EEG, gewijzigd door 93/68/EEG.
Dette udstyr overholder kravene i direktiv nr. 89/336/EEC		EEC så som kompletteras av 93/68/EEC.
		Dette produktet oppfyller betingelsene i direktivet 89/336/
med tillæg nr. 93/68/EEC.
Quest’ apparecchio è conforme ai requisiti della direttiva		EEC i endringen 93/68/EEC.
		Tämä laite täyttää direktiivin 89/336/EEC vaatimukset,
89/336/EEC come emendata dalla direttiva 93/68/EEC.
		jota on muutettu direktiivillä 93/68/EEC.
Notes
• While operations are described mainly	for EL-	• One of the models described in this	manual
6053, unless otherwise specified, the text		may not be available in some countries.
materials apply to both models. In case of need,
the operations are described as “For EL-6810
only:”.
	Part Names
EL-6053		EL-6810
	q		q
	w		w
t	e t		e
	r		r
q Power ON/OFF key		• Yellow colored functions are operated by
w Cursor keys		pressing SHIFT (“SHIFT” is turned on) and the
e Search keys		appropriate keys.
r RESET switch		• In this manual, only the display symbols
t Mode keys		necessary for explanation of this product are
The following notations are used for		shown.

key operations.

➝CM : Clear memory

(in Calculator mode)

➝U : Letter “U”

➝SHIFT : Turn the touch

tone on and off

➝V : Letter “V”

Using the Organizer for the First Time

Be sure to perform the following operations		NOTES
before using the Organizer for the first time.		• If the Organizer is subjected to strong,
1.	Remove the isolating film that is affixed to the	extraneous electrical noises or shocks during
	battery holder on the back of the unit.	use, an abnormal condition may occur in which
2.	Press the RESET switch with a ball-point pen	no keys (including ONOFF ) will respond. Press
	or similar object.	the RESET switch and press SHIFT ENTER to
	“RESET?” is displayed.	delete all the memory contents.
3.	Press SHIFT ENTER to initialize the	• To minimize battery consumption, the Organizer
	Organizer.	is designed to automatically turn off when no
	After “RESET!” is displayed, Home clock is	key has been pressed for approximately 7

Schedule Mode

displayed. (See “Clock Mode”.) You have	minutes.
deleted all the memory contents now.	• The key touch tone is turned on and off by
	pressing SHIFT	. When the tone is turned
	on, “ ” is turned on.

Changing the Guidance Language

Guidance messages can be displayed in 7	To change the language, press SHIFT LANGUAGE
languages – English, Dutch, Portuguese, Italian,	followed by PREV or	NEXT to select the desired
German, French, and Spanish. After initializing the	language, then press	ENTER .

Organizer, the default setting is English.

Entering Characters

Schedule mode is used for storing schedule details (36 characters or under), date and time (year, month, day, hour, and minute).

In the 1st line the same characters are allowable as in Telephone mode.

1. Storing schedule entries

1. Press	SCHEDULE	to	SCHEDULE?
display the Schedule
mode screen.

2.	Enter the details and
	press		.
		ENTER
3.	Enter the date and time.
	• The types of date and time are the same as
	the types set for the clock.

4.Press ENTER to store in the memory. Notes

• Schedules for the following dates can be stored: January 1901 to December 2098.

• If an attempt is made to store an entry without a date or time, or with an invalid date or time, “ERROR!” appears briefly. Enter the correct date and time and press ENTER .

2. Alarm for Schedule mode

When the schedule alarm (“”) is turned on, it is set for all the schedule entries. Beeping sounds for 1 minute when the time for a schedule entry is reached. Press any key to stop the alarm. The schedule alarm cannot be set for an individual

• Alphanumeric letters, symbols, and “+ – × ÷ .”

can be entered into the dot display area (the 1st

line).

Making corrections

• To enter a single-digit date or time, enter “0”

and the digit (e.g. “O2”).

entry.

•	Numbers and some characters (only space, –,
	and F and P in Telephone mode) can be entered
	into the number display area (the 2nd and the
	3rd lines).
•	Basically letters are entered in capital letters
	(“CAPS” is turned on). To enter small letters,
	press		to turn “CAPS” off.
		CAPS

Entering symbols and letters with an accent mark

•To enter a symbol, press SMBL repeatedly until the desired symbol appears:

@#$£¥ ( )~’: /\_&<>ß!?¡¿

•To enter a letter with an accent mark, press SHIFT SHIFT to turn “SHIFT LOCK” on, and

press the appropriate key repeatedly. (Refer to the “QUICK REFERENCE GUIDE” inside the cover.)

• To turn “SHIFT LOCK” off, press SHIFT again.

Move the cursor to the character to be corrected. Enter the correct character to replace the previous one.

Cursor

The cursor (_) indicates the position for entering a character. Move the cursor with the cursor keys

().

Inserting characters

Each time INS is pressed, a space is inserted at the cursor position to allow you to enter a character.

Deleting characters

Press DEL to delete the character at the cursor position.

Press C•CE to clear all the characters that you have entered and not stored yet.

For EL-6810 only: Press BS to delete the character at the left of the cursor.

Memo Mode

Notes or other pieces of information that are not	2.	Enter the memo item					UNION BANK
appropriate for Telephone or Schedule mode can		and numbers.
be entered for convenience.		E.g. UNION					01
					SPACE		272–0011223_
In the 1st line the same characters are allowable		BANK		ENTER
as in Telephone mode. In the 2nd and the 3rd		01
lines you can enter numbers, –, and space. (36		272-0011223
characters or under can be entered in each line.)	3.	Press				to store in the memory.
			ENTER

Storing memo entries

1. Press MEMO to	MEMO?
display the Memo

mode screen.

Notes for storing and recalling entries

Clock Mode

•	When the memory is full, “MEMORY FULL!”	• Pressing	E-MAIL	displays the E-mail address
	appears briefly, and the entry cannot be stored.	on the 1st line directly.
•	When the symbol “ ” or “ ” is turned on,	For EL-6810 only: Pressing				(		)
					E-MAIL		WWW
	more information exists. Press or to	again displays the web address (URL) on the

Home clock
Home city (with “ ”)		Day of the week
Date	LON	MON
	2001– 1– 1
Time	A12–00–00

Each time you press CLOCK , the clock switches between Home and World clocks. (For World clock, “ ” is not displayed.)

1. Before setting the clock

•The default setting for the date is “YYYY/MM/ DD” (year-month-day). To change the setting to “MM/DD/YYYY” (month-day-year) or “DD/MM/ YYYY” (day-month-year):

1.Press CLOCK once or twice to display Home clock (with “ ”).

2.Press SHIFT DATE TYPE .

3.Press PREV or NEXT to select the desired type.

4.Press ENTER to store the new setting.

•To change the 12-hour clock to the 24-hour clock, press 1224 (“A” or “P” is cleared). Each time you press 1224 , the clock switches.

•In the period of daylight saving time/summer time, press DST in advance (“#” is displayed).

2. Setting the clock

1.Press CLOCK once or twice to display Home clock (with “ ”).

2.Press SHIFT SET to start setting.

The cursor starts to flash on the city name.

3.Press PREV or NEXT to select the desired time zone. (Refer to the list of cities described below.)

•Enter the city name, if needed (6 characters or under). Only one changed name for Home clock can be stored.

4.Press to move the cursor to the year.

5.Enter the year (4 digits), the month, and the day (2 digits each).

•The built-in calendar extends from January 1st, 1901, to December 31st, 2098.

6.Press AM•PM to select “A” (morning) or “P” (afternoon) for the 12-hour clock.

7.Enter the time (hours and minutes).

Note: P12-00: noon, A12-00: midnight

8.Press ENTER . The clock starts from “00” seconds.

Notes

•To enter a single-digit date or time, enter “0” and the digit (e.g. “02”).

•If you enter an invalid date or time, “ERROR!” appears briefly. Enter the correct date and time and press ENTER .

Zone	Display	City	Zone	Display	City
No.			No.
0	TNG	TONGA	10	MOW	MOSCOW
1	WLG	WELLINGTON	11	CAI	CAIRO
2	NOU	NOUMEA	12	PAR	PARIS
3	SYD	SYDNEY	13	LON	LONDON
3.3	ADL	ADELAIDE	14	AZ0	AZORES ISLANDS
4	TYO	TOKYO	15	-2H	2hrs behind LON
5	HKG	HONG KONG	16	RIO	RIO DE JANEIRO
6	BKK	BANGKOK	17	CCS	CARACAS
6.3	RGN	YANGON	18	NYC	NEW YORK
7	DAC	DHAKA	19	CHI	CHICAGO
7.3	DEL	NEW DELHI	20	DEN	DENVER
8	KHI	KARACHI	21	LAX	LOS ANGELES
8.3	KBL	KABUL	22	ANC	ANCHORAGE
9	DXB	DUBAI	23	HNL	HONOLULU
9.3	THR	TEHRAN	24	MID	MIDWAY

switch the display.

1st line. Each time you press

E-MAIL

(

WWW

),

Checking details of entries in Telephone mode

the display switches between the E-mail and the

web addresses.

• To display each field on the 1st line, follow the

•

Press and hold

to start the auto scroll on the

symbol “

” or “

” and press

or

. (The

1st line. Press

again to stop or restart the

symbol above the 1st line shows each field.)

scroll. Press

to quit the auto scroll.

C•CE

Recalling entries – Telephone, Schedule, Memo –

First press the desired mode key.

Sorting order

NEXT

: Recalls entries in forward order

•

Telephone and memo entries are stored by the

: Recalls entries in reverse order

first character of the person’s name or memo

PREV

item in the following order (case sensitive):

Sequential search

Press

NEXT

or

PREV

in each mode.

Direct search

• Enter the first characters (7 characters or

•

Schedule entries are stored by date and time.

under) of the person’s name, schedule details,

Note

or memo item, and press

NEXT

or

PREV

.

•

When there is no (further or relevant) entry to

Then press

or

to continue

NEXT

PREV

be recalled, “NOT FOUND!” appears briefly, and

performing a direct search. the display returns to the mode screen.

PRINTED IN CHINA/IMPRIMÉ EN CHINE

00BTO (TINSE0355EHZZ)