Getting started
Quick reference guide - telephone base
IN USE indicator
• On when the handset is in use, when the answering system is answering an incoming call or when you are registering a handset.
•Flashes when another telephone is in use on the same line or when
you are deregistering handset(s) from the telephone base.
•Flashes quickly when there is an incoming call.
VOICEMAIL indicator
Flashes when you have new voicemail. Voicemail is provided by your local telephone company.
It is different from the answering system on the telephone base.
MESSAGE COUNTER
PLAY/STOP
Number of messages (or during playback, message number currently playing).
X/DELETE
Press to delete the message currently playing. When no messages are playing, press twice to delete all old messages.
/REPEAT
Press to repeat a message. Press twice to play the previous message.
CLOCK
Press to review or set the 
clock.
SETUP
Press to hear and change setup options.
ANNC.
Press to review or record the outgoing announcement. Press again to end announcement playback or recording.
RECORD
Press to record a memo or, after pressing ANNC. to record an outgoing announcement.
Press to start or stop message playback.
/SKIP
Press to skip a message.
ANSWER ON
Press to turn the answering system on or off.
VOLUME
Press to adjust playback volume.
HANDSET LOCATOR
Press to make handsets beep so you can locate them.
For complete instructions, please refer to the user’s manual. If you are unable to find your manual, please visit www.telephones.att.com to read and/or download the manual.