ASSEMBLY & OPERATION
4.Place the blending leg as deeply as possible into the bowl and press the trigger switch to turn the stick mixer on. The button must be held for the required duration of operation.
5.Work through the ingredients in the bowl with a gentle raising and lowering motion.
6.Switch off the motor by releasing the trigger switch.
7.Ensure the motor has completely stopped before lifting the blender out of the bowl.
8.When processing has finished, switch off at the power outlet and remove the power plug.
To detach the blending leg
Ensure the trigger switch is released, the power is turned off at power point and the appliance is unplugged. Hold the motor body with one hand, and using thumb and finger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the blending leg to detach.
Recommendations when using as a stick mixer
•The stick mixer blends foods and liquids rapidly, therefore it is easy to over process. Remember when using the blending leg to stop the stick mixer and check food throughout the operation.
•Use caution when blending hot food as it can splatter.
•The stainless steel blending leg allows for hot food to be processed directly in the saucepan. This makes blending soups and sauces very easy.
•For safety reasons remove saucepan away from the heat before processing.
•Ensure the body of the appliance and power cord are kept away from any heat source.
•When pureeing and blending, cut food into uniform sizes. This will ensure smooth and consistent results.
•Warm all liquids to be added to soups and purees, this will ensure even blending.
•Do not operate the appliance continuously for more than 1 minute. Allow the motor to rest for 1 minute between each use.
If food becomes lodged around the processing blade or in the blade guard, follow the safety instructions below:
1.Release the trigger switch, the power off at the power outlet and unplug the cord.
2.Use a spatula to carefully dislodge the food. Do not use fingers as the blades are sharp.
3.After the food has been removed and blades are clear, plug the appliance back into the power supply, switch the power on and continue blending.
10
